For tp-link omada access points (104 pages) Wireless Access Point TP-Link EAP110 Installation Manual. Refer to the EAP Controller User Guide when the EAP is managed by the EAP Controller software. Page 8: Table Of Contents. MAC: Displays the MAC address of the EAP. Num of Clients: Displays the number of clients connected to the EAP. Good day.I will be upgrading a switch in my system.Omada controller PC software plus 2 EAPs and a switch is my setup.There are current clients connected via voucher authentication for 30days.My question is How or If I shutdown the system, (will be replacing the switch)will it loose the current connected clients via voucher and configurations. TP-Link EAP115 Wireless N Ceiling Mount Access Point Free Cloud Centralized Management - Anytime, Anywhere Omada Cloud Controller OC200 and Omada Software Controller make it easy to manage and monitor the whole Omada network in real-time, while cloud service enables remote and secure access no matter where you find yourself. TP-Link SMB Community Business Wi-Fi MAC FILTERING MAC OS EAP controller software. 239 0 TPlink Omada, Custom Name for a.
| Dimensions | 7.1 x 7.1 x 1.9in. (180*180*47.5mm) |
| Networking Interface | Gigabit Ethernet (RJ-45) Port *1（Support IEEE802.3at PoE） |
| Buttons | Reset |
| Antennas | Internal Omni 2.4GHz: 3* 4dBi 5GHz: 3*4dBi |
| Wifi Standards | IEEE 802.11ac/n/g/b/a |
| Power Supply | PoE or External 12VDC / 1.5A Power Supply |
| Maximum Power Consumption | 12.7 W |
| Mounting | Ceiling /Wall Mounting (Kits included) |
| Frequency | 2.4GHz and 5GHz |
| Signal Rate | 5GHz:Up to 1300Mbps 2.4GHz:Up to 450Mbps |
| Wireless Functions | Multiple SSIDs（Up to 16 SSIDs, 8 for each band） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control （Adjust Transmit Power on dBm） QoS(WMM) Band Steering Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client |
| Wireless Security | Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK |
| Transmission Power | CE： ≤19dBm(2.4GHz) ≤23dBm(5GHz) FCC: ≤25dBm(2.4GHz) ≤27dBm(5GHz) MANAGEMENT EAP Controller Software Yes Email Alerts Yes LED ON/OFF Control Yes Management MAC Access Control Yes SNMP Yes System Logging Local/Remote Syslog Local/Remote Syslog Telnet Yes Web-based Management HTTP/HTTPS L3 Management Yes Multi-site Management Yes Management VLAN Yes |
| Omada Controller Software | Yes |
| Email Alerts | Yes |
| LED ON/OFF Control | Yes |
| Management MAC Access Control | Yes |
| SNMP | Yes |
| System Logging Local/Remote Syslog | Local/Remote Syslog |
| Telnet | Yes |
| Web-based Management | HTTP/HTTPS |
| Management VLAN | Yes |
| Certification | CE, FCC, RoHS |
| Package Contents | AC1750 Wireless Dual Band Gigabit Access Point EAP245 Power Adapter Mounting Kits Installation Guide |
| System Requirements | Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10 |
| Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
This chapter describes how to configure TP-Link Omada Controller and EAP AP.
Before proceeding further with the configuration, you need to have a HSNM configured with a domain and a gateway as described in Adding a New Gateway.
Step 1
Tp Link Eap Setup
Download the Omada controller from TP-Link official website: https://www.tp-link.com/it/support/download/eap-controller/#Controller_Software. You can choose between the 32bit and 64bit version.
You need to install the controller in a computer that is on the same network of where you will connect the EAP Access Point. In order to be able to manage the EAP through the Controller, you need to connect both of them on the same network.
Step 2
Before proceeding configuring the Controller, be sure you have connected the EAP Access oint in order the Controller is able to recognize it and manage it.
Step 3
Once the controller has been installed, you can start it by double clicking the TP Link icon created on your desktop.
Step 4
Follow now the wizard to configure the Controller and to be able to manage EAP Access Point:
Step 5
If you have connected your EAP Access Point as previously described, it will appear during the controller configuration wizard.
Step 6
At Step 4, the wizard requires you to configure an SSID and to enter a password. You can skip this step and create an SSID without password later but, if you want, you can follow the wizard creating an SSID with password and remove the password after. Here we followed the wizard.
Step 7
If you want, in order to be able to manage the controller you installed on your computer remotely, you can enable the Cloud Access and configure it following the TP-Link documentation. In the example, we disabled it because it is not mandatory for getting the controller working with HSNM.
Step 1
Once logged in to the controller, click the Settings button on the upper right corner of the management interface.
Step 2
Go to Wireless Settings and from the menu, click the Edit button.
Step 3
Enter the SSID created during the wizard (see Step 6Installing the Omada Software Controller)
Step 4
From the Security Mode dropdown menu, select None.
Step 1
Select the Wireless Control tab and then click the Portal submenu.
Step 2
Step 3
Now you need to enter the parameters of your portal. Enter the details as follows:
- Portal Name–Enter the name for the portal.
- SSID–Enter the SSID previously created.
- Authetication Type–From the dropdown menu, select External RADIUS Server.
- RADIUS server IP–Enter the IP address of your HSNM or the public IP of the internet connection where HSNM is behind to.
- RADIUS Port–Enter 1812.
- RADIUS Password–Enter the secret you set in the System Settings section of your HSNM.
- Radius Accounting–Enable it.
- Accounting Server IP–Reenter the same IP address that you entered in the previous “RADIUS server IP” box.
- Accounting Server Port–Enter 1813.
- Accounting Server Password–Reenter the same secret that you entered in the previous “RADIUS Password” box.
- Portal Customisation–From the dropdown menu, select External Web Portal.
- External Web Portal URL–Enter http://HSNM_DOMAIN_OR_IP/
portal/index.php?domain=DomainName&hotspotname=HotSpotName where instead of HSNM_DOMAIN_OR_IP you must enter the public IP address of your HSNM or the IP to reach it and, instead of GATEWAY_NAME_SET_IN_HSNM, you must enter the name you set for your Gateway in the HSNM configuration. - HTTPS Redirect– Enable it.
Tp Link Eap Controller Mac Os
All other parameters are optional and you can leave as they are.